Cast aluminum is not wrought aluminum
A casting grade and a wrought grade such as 6061 or 6082 use different manufacturing routes. Specify the required product form and condition; do not transfer a wrought-alloy property table to a die-cast part.
Materialführer
Start with what the part needs to do. Then compare the alloy, manufacturing route and finish together.
MSdean helps you turn drawings and application requirements into a practical material discussion. Use this guide to prepare your shortlist before requesting a quote.
01 / Requirements
A material name alone does not define a finished component. Give your supplier the conditions the part must meet.
Describe static loads, repeated cycles, impact and acceptable deflection. Identify threaded joints, press fits and other features that remain loaded in service.
State continuous and peak temperatures, exposure time, moisture, salt and chemicals. Include contact with dissimilar metals and any heat-transfer requirement.
Mark sealing faces, bearing seats, electrical contacts and visible areas. Specify the final dimensions after machining and coating, rather than only the raw casting.
Share the coating type, color, texture and an appearance reference. A decorative finish can change the shortlist, preparation steps and inspection method.
Provide sample quantity, expected batch and annual demand, design maturity and target delivery. Compare tooling and downstream work alongside the piece price.
02 / Compare
Use this table to identify a route worth reviewing. It is not a ranking of materials or a substitute for part-specific engineering.
| Review point | Aluminum die casting | Zinc die casting | CNC aluminum |
|---|---|---|---|
| A reason to consider it | Complex housings and brackets where weight and repeatable geometry matter | Compact components with detailed features and finishing needs | Parts made from wrought stock, especially while quantities or designs are changing |
| Representative grades | ADC12 or A380, selected to the specified standard | Zamak 3 or Zamak 5, selected for the application | 6061 or 6082, with product form and temper specified |
| Design review | Wall transitions, draft, ribs, fill and machining allowances | Feature detail, part mass, assembly method and sustained loads | Stock form, tool access, thin sections and machining setups |
| Finish review | Agree pretreatment and sample appearance for the actual cast alloy | Discuss plating or painting with the complete preparation system | Check the alloy and stock condition against the anodized or coated finish |
| Cost review | Werkzeuge, casting, machining, finishing and inspection | Werkzeuge, part weight, cycle, finishing and assembly | Stock, material removal, setups, finishing and inspection |
Grades shown are examples for discussion, not a statement of stock or approved alternatives. ADC12 and A380 are different designations: do not substitute one for the other without reviewing the applicable chemistry and standard.
A casting grade and a wrought grade such as 6061 or 6082 use different manufacturing routes. Specify the required product form and condition; do not transfer a wrought-alloy property table to a die-cast part.
Zamak 5 generally offers higher strength and hardness than Zamak 3, with lower ductility. Review secondary forming and long-term loading before selecting it simply because it is stronger.
03 / Your starting point
Choose the closest priority to frame your first discussion with our team.
Use the comparison above, then identify the conditions that could rule a material out. The selector offers a discussion route; it does not approve an alloy for production.
04 / Check the details
Strength at room temperature does not describe long-term behavior under load. Review creep and joint relaxation at the actual temperature and service duration, particularly for zinc components. Define the test condition and acceptance criterion.
Consider the alloy, coating, trapped moisture and contact with other metals together. Specify exposure conditions and how performance will be verified. A material family or a coating name alone does not establish corrosion performance.
Do not expect a die-cast alloy to reproduce the cosmetic anodizing result of a wrought grade. Even 6061 and 6082 can give different appearances. Agree a physical sample, surface preparation and inspection conditions before production.
There is no universal quantity at which casting becomes the lower-cost route. Compare the same drawing revision, delivery condition and quantities. Include tooling, machining, finishing, inspection and expected design changes in the decision.
05 / Apply the guide
Discuss an aluminum route, then review the heat-transfer interfaces, cover joint, machining and coating. A housing material alone cannot establish thermal or ingress performance.
Discuss zinc alongside the required plating appearance, assembly method and load case. Include crimping or riveting requirements before comparing candidate zinc grades.
Compare CNC stock for the early design with a cast route for repeat orders. Keep the functional drawing requirements consistent when reviewing both proposals.
Prepare your RFQ
If the material is undecided, tell us what the part must achieve. If it is specified, include the exact grade, standard, condition and rules for any proposed alternative.
Nehmen Sie Kontakt auf