Skip to content
MSdean
Contact Us
Lighting application scene

Home » Industry Solutions » Lighting

Lighting

Review the housing as part of the luminaire’s thermal and sealing system

Our advantages for your project

The complete heat path is considered

  • LED board and interface material
  • Contact area and mounting faces
  • Heat-sink geometry and alloy
  • Orientation and ambient conditions

Sealing depends on the assembly

  • Lid and seal-groove geometry
  • Gasket and screw arrangement
  • Machined contact and sealing surfaces
  • Agreed complete-assembly testing

Outdoor details defined early

  • Coating and preparation requirements
  • Mounting holes and fastening points
  • Installation and handling conditions
  • Protective packing and delivery state

Engineering support for lighting

Silver finned housing with a rectangular front opening

01 · Engineering support

Start With the Complete Thermal Path

A luminaire housing is one part of the route that carries heat from the LED into the surrounding air. Review the LED board, interface material, mounting contact and heat sink geometry together with the installation orientation. Identify the contact surfaces that require controlled flatness or machining, and confirm the operating power and ambient conditions for validation. More metal or more fins does not automatically remove the limiting interface. The useful evidence is a defined assembly and temperature measurement arrangement that can be repeated when the sample or production design changes.

Discuss your requirements
CNC machining equipment in the workshop

02 · Engineering support

Keep the Seal Consistent Across the Assembly

A sealed light combines the casting, cover, gasket, fasteners and cable entries. Review the groove, mating face and tightening conditions as part of that complete interface, including the effect of any machining or finishing. The protection target should identify the assembled configuration to be tested and the acceptance criteria that apply to it. Changes to a gasket, connector or cover can require further confirmation even if the housing drawing is unchanged. This makes the manufacturing check plan relevant to the outdoor protection expected from the finished luminaire.

Discuss your requirements
Coordinate measuring machine for dimensional inspection

03 · Engineering support

Match the Coating and Mounting Details to Use

The outer finish, mounting bracket and packaging all influence how the luminaire reaches installation. Define the exposure conditions, appearance reference and surfaces that must remain suitable for assembly. Review coating coverage at edges and mounting features, together with the dimensions checked after finishing. If corrosion testing is specified, retain the actual finish system and sample conditions in the report. At delivery, separate visible surfaces and protect projecting features. These details connect the accepted sample to the part your installation team receives, without making an unsupported claim about the complete lamp lifetime.

Discuss your requirements

Components for lighting

Connect the luminaire housing, thermal body and driver enclosure to the complete light assembly. Review LED contact, sealing and outdoor exposure using the intended installed configuration.

Long lighting housing with cooling fins and mounting features

Finned luminaire housings

Combine the lighting body, mounting features and heat-transfer geometry.

Review: LED contact areas · mounting points · surface protection

Explore this part family
Finned thermal housing with a rectangular front opening

Thermal housing bodies

Transfer heat through the specified mounting and contact arrangement.

Review: Base flatness · fin geometry · operating orientation

Explore this part family
Electronic enclosure body and cover with mounting lugs

Driver & control enclosures

Provide a defined cover and connection interface for the driver or controls.

Review: Gasket interfaces · cable entries · final assembly verification

Explore this part family

Representative component illustrations. Final geometry, alloy, finish and acceptance criteria are reviewed against your drawing and application.

Die casting production equipment

Manufacturing processes for lighting

Coordinate the casting and secondary operations around the part you need to receive. The drawing, operating requirements and final delivery condition guide the manufacturing route.

  • Tooling & die casting
  • Trimming & deburring
  • CNC machining & tapping
  • Surface finishing
  • Inspection & protective packing

Review tooling, critical interfaces, surface requirements and inspection before production.

Get in touch

Materials & surface finishing

Choose the casting alloy for the combined thermal, structural, environmental and manufacturing requirements. Integrated shapes may suit die casting; long constant-section heat sinks may merit comparison with extrusion and machining.

Material or routeTypical considerationConfirm for your project
Aluminum die castingHousings, structural features and thermal componentsAlloy grade, functional geometry, temperature and secondary machining
Zinc die castingCompact detailed parts and suitable decorative applicationsMass, sustained load, service temperature and finish compatibility
Machined interfacesHoles, mounting faces, threads and sealing featuresDatums, tolerances, surface condition and measurement method
Surface finishingAppearance and environmental protectionApproved sample, coating-free areas, final fit and applicable tests
Surface finishing production environment

Agree the finish in its final condition

Review appearance samples, preparation, masking and the surfaces that must retain a functional fit. Define the relevant test conditions and acceptance criteria with the part requirements.

Review material and finish requirements

What supports a reliable delivery

Connect each project requirement to the manufacturing step and evidence needed to confirm it.

Coordinate measuring machine for dimensional inspection

Thermal contact dimensions

Identify the functional features and agree how they will be checked against the drawing.

CNC machining equipment in the production workshop

Machined sealing features

Keep the requirements and approved references available at the relevant project stage.

Polishing and surface preparation equipment

Surface preparation checks

Review the operation and setup around the interfaces that affect your assembly.

Surface finishing production environment

Coating requirements

Define what must be protected, finished or checked in the final delivered condition.

Coordinate measuring machine for dimensional inspection

Mounting interfaces

Confirm the part, sample or assembly inputs required for the agreed verification.

Packed cartons prepared for delivery

Protected delivery state

Match handling and packing to the geometry, surface and next assembly operation.

The inspection scope, records and delivery requirements are agreed for the specific part and its intended use.

Lighting FAQs

Practical questions to clarify before tooling, sampling and production.

Can you help review a heat sink housing?

Share the heat source, power, LED board arrangement, interface material, mounting orientation and ambient conditions. We can review the casting and machining interfaces in support of the agreed thermal validation plan.

Can you guarantee a specific LED lifetime?

LED service life depends on the LED, driver, temperature and operating conditions. A housing alone does not establish a lifetime claim; any published result needs appropriate complete-luminaire evidence.

Can you support IP and IK requirements?

IP and IK address different requirements. Define the complete sample, target rating and test arrangement, then review the casting, sealing and mounting features that support that verification.

How do you control LED board mounting surfaces?

The drawing should define the relevant flatness, surface condition, mounting holes and datums. Those requirements guide machining and inspection of the interface between the board assembly and housing.

Which finish is suitable for outdoor lighting?

Review the installation environment, alloy, appearance and relevant test requirements. The coating system, preparation and sample acceptance should be confirmed before production.

Is die casting always the best route for a heat sink?

Complex integrated housings can suit die casting. Long constant sections, low volumes and changing designs may merit comparison with extrusion or machining before selecting the manufacturing route.

Start your lighting project

Provide the luminaire type, heat load and thermal layout, mounting orientation, ambient conditions, enclosure and impact protection targets, finish and expected quantities.

Portfolio preview. This form is for demonstration only.

The details you provide will be used to respond to your project inquiry.

Discuss your project

Share your part drawing, material and expected quantity.

Portfolio preview. This form is for demonstration only.

The details you provide will be used to respond to your project inquiry.