Aluminum
Lightweight housings & structural parts
- ADC12
- A380
For equipment housings, thermal components and structural applications.

- Equipment
- 4 cold-chamber machines
- Clamping force
- 200–800T
From tooling to finished parts.
MSdean brings aluminum and zinc die casting, CNC machining, finishing and inspection together at our Huizhou manufacturing base.
One team coordinates your project from drawing review to delivery.
Share your drawing, quantity and key requirements.
MSdean integrates tooling, aluminum and zinc die casting, CNC machining, finishing and inspection at our Huizhou manufacturing base.
MSdean reviews wall thickness, draft angles, gating and machining allowances before tooling. Mold-flow analysis helps assess filling behavior and potential air entrapment, supporting mold design and process development.
Alloy-specific tooling review for ADC12, A380 and Zamak-series zinc alloys
In-house mold manufacture, trials and small-batch validation. Tooling is reviewed against part requirements, with documented maintenance and repair support throughout production.
Four 200–800T cold-chamber machines for aluminum, plus 160T and 280T hot-chamber machines for zinc. Alloy, tooling and production parameters are reviewed for ADC12, A380 and Zamak-series parts.
Runners, gates and residual flash are removed before secondary processing. Edges and specified surfaces are deburred to prepare castings for machining, finishing and assembly.
3- and 4-axis milling, drilling, tapping and boring for critical holes and mating surfaces. Typical ±0.02 mm machining capability is subject to part geometry and drawing review.
Grinding, polishing, passivation, powder coating, liquid painting and screen printing. Surface preparation, coating thickness and appearance criteria are agreed for the application before processing.
Components are assembled to documented work instructions, with dedicated fixtures supporting repeatable positioning. Assembly scope and critical interfaces are reviewed against finished-product requirements.
CMM first-article inspection, in-process sampling and critical-dimension checks. Optical measurement, coating-thickness measurement and salt-spray testing support project-specific inspection requirements.
Protective trays, custom-fit inserts and cartons are selected for component handling needs. Packaging specifications and shipment arrangements are confirmed against the agreed delivery plan.
Material selection
Match the alloy to your part, finish and production requirements.
Lightweight housings & structural parts
For equipment housings, thermal components and structural applications.

Fine detail & decorative surfaces
For detailed housings, appliance components and decorative hardware.

Engineering & DFM
Review casting, machining and assembly requirements before tooling begins.
Review changes in thickness and local mass.
Plan release direction, parting lines and ejection.
Review transitions, corners and metal flow.
Identify critical faces, holes and assembly interfaces.
Use mold-flow review to assess potential filling issues.

Casting, staged CNC machining, edge preparation and appearance control.
Explore the process→
Surface preparation, machining, dedicated test fixturing and protective packing.
Explore the process→
Zinc component samples with a plated finish on curved and recessed surfaces.
Discuss your drawing→
GLOBAL REACH
MSdean provides custom aluminum and zinc die casting, from tooling and CNC machining to finishing and inspection, with support through international delivery.
QUALITY MANAGEMENT SYSTEMS
IATF 16949
ISO 9001:2015
ISO 14001:2015
See where your parts are cast, machined, finished and assembled.
Photo unavailable. Explore this floor in the 3D tour.
Aluminum and zinc die casting, with tooling trials and process checks before batch production.Machining critical holes, threads and mating surfaces after casting.Surface preparation, coating and curing to meet your appearance and protection requirements.Removing flash and sharp edges, then preparing casting surfaces for the specified finish.Component assembly, final preparation and protective packing before shipment.Project coordination, drawing reviews and customer discussions in our office and showroom area.
Loading your factory tour…The factory tour could not load. Please try again or open it in a new tab.
Secondary operations & inspection
Machining, finishing and assembly — with checks along the way.

Milling, drilling, tapping and critical-face machining.

Grinding, polishing, powder coating and liquid painting.

Work instructions, dedicated fixtures and fit checks.
Four surface indications to discuss when defining the part, tooling and inspection requirements.

A seam or line where metal fronts meet without joining completely.
Control point: Review die and melt temperatures together with filling, gating and overflow conditions.

Thin excess metal along a parting line, slide boundary or insert edge.
Control point: Check die closure and mating surfaces; review machine and process conditions before trimming.

Smooth depressions, often near thicker sections or behind ribs and bosses.
Control point: Review wall transitions, local thermal balance and the feeding or pressure sequence.

Raised areas on the surface that can be associated with gas below the casting skin.
Control point: Investigate gas sources and venting; review filling and thermal conditions against process records.
Use the indication and its location to start the investigation. Confirm the cause against tooling condition and process records.
Explore the defect guide→Why MSdean
Turn the drawing, finish and packing requirements into a production plan.

MSdean team meeting
Tooling, casting, machining, finishing and assembly connected around your part.
| Your project needs | Our factory response |
|---|---|
| Clear drawing requirements | ✓DFM review before tooling |
| Critical dimensions | ✓Casting and CNC features reviewed together |
| Consistent appearance | ✓Finish samples and inspection criteria agreed |
| Parts protected in transit | ✓Protective trays, inserts and cartons |
Get in touch
Review tooling, casting and finishing requirements for your part.
For early-stage projects, a sketch or a brief part description is enough to start.
Share a drawing or 3D model, your alloy and finish requirements, and the estimated quantity.
Portfolio preview. This form is for demonstration only.
The details you provide will be used to respond to your project inquiry.